UNION JACK SLATE CLOCK

£48.00

20cm Welsh Slate Clock

Clear

Description

UNION JACK SLATE CLOCK. A square clock made from natural Welsh Slate, with a UNION JACK image engraved in the centre.

  • 20cm x 20cm
  • Hand cut Welsh Slate
  • Grey or Heather (colour)
  • Riven texture
  • Battery powered quartz mechanism
  • Built in bracket for hanging
  • Silver or gold coloured hands
  • Engraved clock face; full numbers
  • Wall mounting

Please note the 2nd image is Welsh Heather Slate but with a full clock face.  It has been added to this gallery to assist with the decision on slate type.

MATERIALS union jack slate clock

To make these clocks we use Welsh Slate, be it Welsh Grey or Welsh Heather.  Welsh Slate is generally regarded as one the finest slates in the World.  It has been used for centuries on all kinds of buildings, including the likes of St Pancreas and Kings Cross Stations, Buckingham Palace, as well as Number 10 Downing Street.  In other words, this is a prime quality material.  It is typically 5.5mm thick, though it can be up to 7mm, with visible graining and texture to the surface and edges.

COLOUR VARIATIONS UNION JACK slate clock

Welsh Grey Slate is typically a dark grey colour with visible veining on the surface.  Occasionally Welsh Grey contains small elements of pyrite, also known as fool’s gold.  These inclusions are naturally occurring and in no affect the quality or durability of the slate.

Welsh Heather Slate has a plum/red tone and generally a smoother surface texture than welsh grey, with minimal evidence of veining.  Welsh Heather sometimes contains small mineral deposits, which are green’ish’ in colour.  Again, these are naturally occurring, cannot be removed and in no way affect the beauty of this natural material.

MAKING PROCESS UNION JACK slate clock

We buy our Slate ready split, from the quarries in North Wales.  We cut each piece to size using a traditional hand guillotine.  This method of cutting produces what is known as a dressed or feathered edge.  In other words, the finish is rustic in appearance.  Once we have cut the slate to size, it is washed, then oiled, then engraved.  After that, we drill the hole for the mechanism and fit this along with the clock hands.  Since we don’t make the mechanisms and hands, each fully assembled clock is tested for a minimum of 24 hours before being despatched.

GIFTS

If you are buying this item as a gift and would like it sending directly to the recipient, please let us know by filling out the NOTE section at checkout.  If you would like us to include a message with the item please tell us your message in the NOTE section at checkout.  For gifts being sent direct, no invoice details will be included, and please double check the mailing address for accuracy.

PACKAGING

All clocks are boxed before being packaged for despatch.  Wherever possible we use paper or cardboard packaging.  Of course we have a duty to do our bit for the environment, whilst at the same time ensuring our products arrive undamaged.  Because it is sometimes necessary to use alternative packaging, all of it can be recycled so please do your bit too

SHIPPING

We send all items via Royal Mail or Parcelforce using a Signed For service.  Shipping costs are determined by the size and weight of the item ordered, however you can choose whether the item is shipped first or second class.  Shipping costs for multiple items on the same order will therefore be determined by the total weight and size of the packaging required to ship.

PRODUCT CARE

Apart from an occasional dust, there is no required aftercare with this product.  However, a few points to note.  When changing the time, it is imperative not to rotate the hands, since this could result in damage to the mechanism.  Before inserting the battery, we suggest wrapping a small piece of ribbon around the battery, so when it needs changing it’s easier to remove.  Similarly, a thin piece of paper works well too.

PLEASE NOTE:

All measurements are approximate.  Even though we take every care to make each item to the dimensions specified, slight variations are possible and should be anticipated.

BESPOKE

If you would like this style clock making in a different size please get in touch

Additional information

slate

welsh grey, welsh heather

hands

gold, silver

Reviews

There are no reviews yet.

Be the first to review “UNION JACK SLATE CLOCK”

Your email address will not be published. Required fields are marked *