WELLY BOOT STAND made in solid oak. The perfect addition to every boot room or utility, available in a range of sizes and styles.
- Sizes for between 4-8 pairs
- Tall posts for long or adult boots
- Short posts for short or children’s boots
- Any combination of tall and short posts
- Solid Oak components; base and posts
- Choice of inscriptions
- Can be PERSONALISED
- Oiled ready for use
- Engraved along ONE side of the base
DIMENSIONS OF A 4 PAIR; 2 ADULT + 2 CHILDREN
- Length of Base – 46cm
- Width of Base – 15cm
- Thickness of Base – 4cm
- Posts – 3cm diameter
- Adult post height – 34cm
- Child post height – 27cm
To calculate the length of stands with more than 4 pairs, simply add 10cm for every extra adult post and 7cm for every child post. The width and thickness of the base are always the same. As are the heights of the posts for both adult and child.
Lead time is typically 3 weeks from ordering
To make a WELLY BOOT STAND we use kiln dried PRIME EUROPEAN OAK. In other words, we use top grade timber. All our OAK comes from sustainable sources and is FSC/PEFC certified. Typically golden-brown in colour, with a straight grain and a medium to course texture. Each component, such as the base and all the posts are all made from individual pieces of solid oak
We individually make every WELLY BOOT STAND to order. Our first step is to prepare the oak, which involves cutting, planing, drilling, routing and sanding the timber. After that, we engrave the inscription into the base. The next step is to oil each part, ie the base and posts, ahead of it being assembled. Once the oil is dry, we assemble to stand. Each post is set into the base, as opposed to just being attached to the base. The posts are glued into the base and then screwed from the bottom to ensure stability. Once the posts have been fitted the stand is ready for despatch.
All items are boxed before being packaged for despatch. Wherever possible we use paper or cardboard packaging. Of course we have a duty to do our bit for the environment, whilst at the same time ensuring our products arrive undamaged. Because it is sometimes necessary to use alternative packaging, all of it can be recycled so please do your bit too.
If you are buying this item as a gift and would like it sending directly to the recipient, please let us know by filling out the NOTE section at checkout. If you would like us to include a message with the item please tell us your message in the NOTE section at checkout. For gifts being sent direct, no invoice details will be included, and please double check the mailing address for accuracy.
We send all items via Royal Mail or Parcelforce using a Signed For service. Shipping costs are determined by the size and weight of the item ordered, however you can choose whether the item is shipped first or second class. Shipping costs for multiple items on the same order will therefore be determined by the total weight and size of the packaging required to ship.
It’s highly likely that your WELLY BOOT STAND will get wet and possibly muddy. We recommend allowing it to air dry, rather than placing it in front of a radiator or any other direct heat source. It will tolerate a wipe down with a damp cloth and to remove any mud or dirt either allow it to dry before brushing off or wet wipe it clean. Should you wish to re oil the stand, we suggest doing so when it is fully dried, and notably follow the instructions of the oil you are using.
All measurements are approximate. Whilst we take every care to make each item to the dimensions specified, a few mm difference is possible, therefore a slight variance should be anticipated.
If you would like a WELLY BOOT STAND making in a different size, or with any different combinations than those listed please get in touch